The Ford Focus was launched as a 2000 model yr entry into the compact market. With smooth styling and trim levels designed to turn the heads of younger consumers, the Focus has efficiently competed with the Japanese automakers who’ve historically lead this market. Altering out the stereo within the Focus requires more mechanical talent than most stereo swaps, particularly for the 2008 model addressed here.
Ford Focus Car Audio Stereo/Radio Installation Instructions
1. Unhook the impartial wire on the battery before starting. Set out a small baby food jar or plastic cup to help secure screws and bolts whereas working under the dash.
2. Pull the emergency brake up and set an automated transmission in “Drive” with out turning the car on. Open the center compartment within the center console and pry the plastic up with a flathead screwdriver.
3. Take away the console and the screw on either aspect of the ability terminals to loosen the radio housing. Use the flathead screwdriver to take away the sprint piece positioned over the passenger airbag.
4. Find and take away the 2 screws immediately above the instrument panel. Place the steering wheel in the lowest potential setting so you possibly can pull out the unfastened plastic piece.
5. Pry the air vents situated over the radio meeting out of the Ford Focus dash. Remove the two screws holding the console and radio, and pull the entire heart portion of the sprint out by pulling down from the top.
6. Disconnect the wiring harness from the back of the unit and change out the unique harness adapter for the brand new one. Join the harness to the again of the stereo and slide the unit into the center console trim.
7. Connect the impartial cable on the battery and check the stereo to make sure all the audio system are working. Screw the console back in place and reattach all the trim and molding.
